Introduction of R & D Center
Electrostatic diluent
Special ink irradiated to UV light will dry the characteristics of printing, suitable for paper is not easy to dry, or acrylic, wood and other flat materials.
Classification:
Products
Coating series
Electrostatic diluent
Key words: ink series
- Description
-
Product Overview: This diluent is composed of aromatic hydrocarbons, lipids, alcohols, and ether solvents, with good solubility and reasonable volatilization rate. It has good leveling properties, is not easy to hang, and has good electrostatic adsorption effect.
Product Usage: Due to its high hardness and wear resistance, the product is widely used in daily hardware products such as locks and kitchenware.
Technical indicators:Project
TechnologyIndicator
Appearance
Clear, transparent, and free of suspended solids
Colour
≦1
Solubility
Completely dissolved
Moisture content
Not turbid
Resistance
20-30
Matters needing attention:
1. During construction, select the appropriate type of diluent based on temperature and specific equipment.
2. This product should be stored in a cool, dry, and well ventilated place, away from sources of fire. Heat source.
3. The remaining products should be sealed and stored (tightly covered), and should not be stored outdoors for a long time.
Under the above conditions, this product can be stored for six months and can still be used after passing the inspection.
For most liquid materials, the composition information, structural information, and polarization mechanism are obtained through the precise measurement of dielectric constant eggs, which has recently become more and more popular than optical-based spectral egg characterization. Especially for natural mixtures, such as milk, fruit juice, grains and some soft tissues, the advantages of permittivity characterization are more prominent.
SiP-level package products based on domestic DDR3 die with a package size of 8.5mm x 10mm. The electrical characteristics of the product meet the JESD79-3F DDR3 SDRAM standard. Two 16-bit DDR3/3L bare chips, terminating resistors and capacitors are internally sealed to form a 32-bit memory chip. The product design conforms to industrial standards and can be widely used in data caching and data processing.
MESSAGE
If you are interested in our products, please leave your email, we will contact you as soon as possible, thank you!
Add: No. 1610, Erhuan North Road, Huzhou City, Zhejiang Province
Tel: 0572-2572311
Fax: 0572-2572511
Manufacturing Department: No. 3072, Anbin Road, Binhai Industrial Zone, Shaoxing City, Zhejiang Province
Tel: 0575-81199804
Fax: 0575-81199807
Scan and follow us
Copyright©2024 ZHEJIANG SIVER DEER CHEMICAL CO.,LTD. All rights reserved www.300.cn SEO