Introduction of R & D Center
Acrylic polyurethane paint
Special ink irradiated to UV light will dry the characteristics of printing, suitable for paper is not easy to dry, or acrylic, wood and other flat materials.
Classification:
Products
Coating series
Acrylic polyurethane paint
Key words: ink series
- Description
-
Product Overview: This product is a two-component self drying paint that can also be baked at low temperatures to accelerate drying. This product has a good hand feel, high glossiness, strong adhesion, and excellent corrosion resistance, chemical resistance, and weather resistance.
Product application: Painting for automobiles, motorcycles, machinery, household appliances, etc.
Technical indicators:Project
Index
Experimental methods
Hardness
H
Chinese pencil
Adhesion
100/100
100/cm²Tape method
Impact strength
No cracking or detachment
50kg.cm
Water resistance
No abnormalities
200 hours of tap water
Acid resistance
No abnormalities
5%Hydrochloric acid solution for 200 hours
Alkali
No abnormalities
5%200 hours of caustic soda solution
Resistant to yellowing
No abnormalities
150℃X60 minutes
Weather resistance
ΔE<1
（ASTM G53).QUV100小时
matters needing attention:
1. Mix the paint with the curing agent according to the specified ratio, and then adjust the construction viscosity with LSU polyurethane diluent.
2. Construction viscosity (apply 4 # cup): 13-18 seconds
3. Air pressure: 3-4 kgf/cm ².
4. The distance between the spray gun and the construction part is 20-30 cm.
5. Drying time: 70 ℃/30 minutes.
For most liquid materials, the composition information, structural information, and polarization mechanism are obtained through the precise measurement of dielectric constant eggs, which has recently become more and more popular than optical-based spectral egg characterization. Especially for natural mixtures, such as milk, fruit juice, grains and some soft tissues, the advantages of permittivity characterization are more prominent.
SiP-level package products based on domestic DDR3 die with a package size of 8.5mm x 10mm. The electrical characteristics of the product meet the JESD79-3F DDR3 SDRAM standard. Two 16-bit DDR3/3L bare chips, terminating resistors and capacitors are internally sealed to form a 32-bit memory chip. The product design conforms to industrial standards and can be widely used in data caching and data processing.
MESSAGE
If you are interested in our products, please leave your email, we will contact you as soon as possible, thank you!
Add: No. 1610, Erhuan North Road, Huzhou City, Zhejiang Province
Tel: 0572-2572311
Fax: 0572-2572511
Manufacturing Department: No. 3072, Anbin Road, Binhai Industrial Zone, Shaoxing City, Zhejiang Province
Tel: 0575-81199804
Fax: 0575-81199807
Scan and follow us
Copyright©2024 ZHEJIANG SIVER DEER CHEMICAL CO.,LTD. All rights reserved www.300.cn SEO